Note:
1. During installation, for safety, be sure to turn off the air source first .
2. Please test the air pressure and tools to be normal before starting the formal operation.
Safety User Guide:
In order to enable you to use this tool correctly and not to be harmed at work, please read the following items carefully and strictly implement them before use.
1. The maximum air pressure used cannot exceed 100PSI, or the maximum pressure required in the instructions.
2. When not in use, changing tool accessories or performing maintenance, please turn off the air source and disconnect the tool from the air source connector.
3. Non-professionals cannot modify the tool structure by themselves, or replace parts from other manufacturers.
4. Do not leave excessively long gas lines in walkways or work areas, which could cause staff to trip and slip.
Maintenance and Repair Guide:
1. Use properly pressured air. Please use the gas with the pressure in the range of 65-100PSI or the pressure required in the manual. If the pressure is too low, the work efficiency of the tool will be significantly reduced or even not work properly. If the pressure is too high, although the working efficiency of the tool can be improved, it is easy to damage the internal parts and shorten the tool life.
2. Use filter. Moisture, dust, rust and other foreign matter in the compressed air are the main reasons for premature aging of tool parts, so it is necessary to add a filter to filter the foreign matter in the air and provide clean and dry gas for the tool.
3. Lubrication of tools. Drop 2~3 drops of lubricating oil into the air inlet before use. When working continuously for a long time, the middle should also be interrupted to replenish lu
Reviews
There are no reviews yet.